96 Cafe

Mixer Model 4c
Browse through this page if you are looking for Mixer Model 4c

Agilent Network Analyzers

Agilent offers a variety of network analyzers with the frequency, performance, and versatility to meet your measurement needs. To help you determine which network analyzer is right for you, this selection guide provides an overview and side-by-side comparison of all our network analyzers. In addition, you will find a discussion of the typical network analyzer applications, the measurement needs of each, and how Agilent network analyzers meet those needs.

1.  FieldFox RF Analyzer

The FieldFox RF Analyzer is the world's most integrated handheld instrument for wireless network installation and maintenance. It combines cable/antenna analysis, spectrum analysis, interference analysis, power meter measurements, vector network analysis, and a vector voltmeter into one rugged, compact, lightweight and weather-resistant package. Fieldfox is 50

percent faster than traditional handheld instruments and offers superior dynamic range (96 dB) and sensitivity (-148 dBm) in the spectrum analysis mode.

 

Features:

• Integrated QuickCal calibrates without a calibration kit

• Immediate calibration with CalReady

• Connector covers help keep dust out

• Anti-glare 6.5 inch LCD display with LED backlight

• Convenient side strap makes it easy to hold and carry

• Task-driven keys are grouped to easily and naturally perform standard field

measurements

• Portrait design and large buttons for easy operation - even with gloves on

• Dedicated marker keys for quick marker function access

• Backlit keypad

• Easily accessible battery compartment

• LAN port, USB port, and SD flash card slot for data transfer and storage

 

2. ENA-L RF Network Analyzers

Providing the latest in modern technology and flexibility, the Agilent ENA-L network analyzers provide basic vector network analysis in a wide range of industries and applications such as wireless communication, cable TV, automotive, education, and more. Designed to reduce tune and test times, these analyzers provide increased throughput to improve your measurement productivity.

The ENA-L offers all of the critical performance and features needed in R&D, manufacturing, and service to test RF components such as: filters, amplifiers, antennas, cables, CATV taps, and distribution amplifiers.

 

Features:

• 120 dB dynamic range and 0.005 dB rms trace noise (3 kHz IFBW)

• S-parameter or T/R test set models

• 50 ohm or 75 ohm system impedance available

• optional fault location and structural return loss measurement

• Built-in Visual Basic for Applications (VBA)

• Optional electronic calibration (ECal) module simplifies and speeds your

calibration process

 

3.  LF-RF Network Analyzer

The Agilent E5061B is the latest addition to the industry-standard ENA Series network analyzers. The option E5061B-3L5 expands the frequency range down to 5 Hz for network analysis, while covering the most frequently-used RF ranges up to 3 GHz.

With its basic and useful S-parameter measurement ability in a wide frequency range, the E5061B can help you in a variety of measurement areas. Meanwhile, the uncompromised performance in a low frequency (LF) range along with the gain-phase test port strongly supports you in designing LF components and circuits.

The broad coverage for low-frequency devices such as DC-DC converters and sensor circuits to RF devices used in the radio systems and wireless interfaces enables you to improve the performance and quality of your end products. The E5061B works as a strong and convenient network analyzer in every lab that needs network analysis.

 

Features :

• 5 Hz to 3 GHz frequency

• S-parameter test port (5 Hz to 3 GHz, 50 Ω)

• Gain-phase test port ( 5 Hz to 30 MHz, 1 MΩ/50 Ω)

• Excellent dynamic range down to LF

• Built-in DC bias source (up to ±40 Vdc)

• Compact form factor (254 mm depth)

• Built-in Visual Basic for Applications (VBA)

 

4.  ENA Network Analyzers

The Agilent ENA offers fast, accurate measurements for multiport components such as duplexers and couplers. Up to four built-in test ports are available in the E5071C (4.5, 6.5, 8.5, 14, and 20 GHz).

The ENA offers a built-in balanced measurement capability, which enables you to test advanced handset components such as balanced SAW filters. It provides mixed-mode S-parameter measurements with a fixture simulator function that includes matching circuit embedding, fixture de-embedding and impedance conversion capabilities.

Features:

• 123 dB dynamic range and 0.004 dB rms trace noise (70 kHz IFBW)

• 8753x successor for general purpose use

• 2- or 4-port measurements with full port calibration

• Built-in balanced measurement capability

• Expandable with multiport test sets (E5092A)

• Built-in Visual Basic for Applications (VBA)

• Optional time-domain and frequency-offset capabilities

• Optional removable hard disk drive

• Optional electronic calibration (ECal) module simplifies and speeds your calibration process

• Hardware and software upgrade paths available

5.  PNA-L Network Analyzers

The PNA-L is designed for your general purpose network analysis needs and priced for your budget. Advanced features help you work quickly, easily, and accurately. With the same firmware as the PNA, the PNA-L offers the perfect balance of value and performance.

The PNA-L is available with frequency coverage from 300 kHz to 6 and 13.5 GHz, 10 MHz to 20, 40, or 50 GHz and offers capabilities that can dramatically increase your design and test efficiency. 4-port models are also available from 300 kHz to 13.5 or 20 GHz. The Windows operating system provides the ability to expand the instrument's connectivity and provides tools for maximum flexibility. From the Windows desktop you can install measurement tools, which reduce the need for a dedicated PC. Use embedded Help to quickly refer to programming and user documentation from within the instrument. Furthermore, COM/DCOM programming provides a powerful automation environment.

 

Features:

• Measurement speeds as fast as 4 to 9 µs per point

• Superior performance and advanced connectivity compared to our

872x network analyzers

• Optional built-in second source (4-port models only)

• Optional time-domain and frequency-offset capabilities

• Optional electronic calibration (ECal) modules allow you to calibrate

10 times faster than mechanical calibration

• Up to 32 independent measurements channels

 

6.  PNA Microwave Network Analyzer

The Agilent E8361/2/3/4C are the microwave frequency models from the PNA series of network analyzers. These models offer an unsurpassed combination of high performance, speed, and outstanding interconnectivity capabilities to meet the challenges of component testing.

The microwave PNA network analyzers cover 10 MHz to 20, 40, 50 and 67 GHz frequency ranges with excellent accuracy. These analyzers are suitable for high-performance microwave devices, such as satellite communication components. They offer 123 dB dynamic range at the test ports and 136 dB with direct receiver access. They also provide TRL/LRM calibration capability for in-fixture and on-wafer devices. In addition, the receiver architecture enables frequency offset mode to characterize your mixers and converters. The configurable test set allows you to connect external test sets easily and make accurate multiport measurements.

Features:

• 136 dB dynamic range with direct receiver access

• Expandability with configurable test set

• Optional advanced mixer and converter test

• Optional electronic calibration (ECal) modules allow you to calibrate 10 times

faster than mechanical calibration

• Optional antenna and pulsed-RF measurements

 

7.  PNA-X Microwave Network Analyzer

The Agilent PNA-X premier-performance network analyzers are designed for high performance active device tests that help you minimize design iterations, test system integration, and significantly simplifies test processes. The industry-leading performance and highly integrated, configurable nature of the PNA-X makes it the ideal solution for comprehensive network analysis and tests.

 

The PNA-X is available with frequency range of 10 MHz to 13.5, 26.5, 43.5, and 50 GHz, and offers 2- or 4-port models. The PNA-X's very low harmonics internal source is ideal for active device characterization, and delivers the highest accuracy. The optional second internal source (standard for 4-port model) together with internal combining network allows fast swept intermodulation distortion measurements for amplifiers. Internal path switches and rear access loops provide maximum flexibility for integrating signal conditioning components or external instruments, and turn the PNA-X into a test hub for a single-connection multiple-measurement (SCMM) solution.

 

Features:

• Integrated 2- or 4-port with balanced measurements

•   130 dB dynamic range, 32 channels, 32,001 points

•   Second internal source (optional for 2-port model)

•   Optional combining network for two-tone measurements

•   Optional path switches for SCMM

•   Optional rear access loops for signal conditioning or external instruments

About the Author

Bruce Jordan is the Marketing Specialist of icontestequipment
http://icontestequipment.com offers Buy & Sell Products for more information visit http://icontestequipment.com/

Thank you for looking at our Mixer Model 4c information.

You can go back to Blenders for even MORE good stuff.